Wir produzieren in Italien
WIR LIEFERN WELTWEIT

Produkte

PIPEX E PIFLEX ®

PIPEX E PIFLEX ®
Product Description

Pipex and Piflex are conveyor belts designed for tubular conveyor systems equipped with a textile or a steel cord carcass, respectively. The special production method for this important product is the result of exhaustive tests and proper theoretical evaluations which allowed to obtain Pipex and Piflex belts whose main characteristic is a significant transversal flexibility.
The tubular conveyor system is designed to allow the belt to wrap around the conveyed material while it remains flat at loading, discharging areas and takeup zone.
Consequently, over the full conveying length, Pipex and Piflex belts are shaped into a tubular section by idler frames properly arranged in hexagonal form. The advanced technology of Pipex and Piflex for tubular conveyor system includes all the typical advantages of traditional trough belts adding further characteristics which make its use suitable under technical and economical profiles. Past unsolved logistic and environmental protection problems can now easily faced and overcome. Main advantages of this technology are:


• Horizontal and vertical curves with reduced bending radius
• Little space requirement by compact plant design
• Reduced spillage of materials loaded from the belt
• Dust free transportation
• Low maintenance

Applications Fields

Pipex and Piflex tubular conveyor belts are high technology products designed upon customers specific requests to properly work as per the operational characteristics of the plant where they will be installed.

The rubber covers quality is studied and developed to meet the specific needs of the conveyed materials.

The environmental regulations introduced in the last years require the industries to redraw the use of the plants for the transportation of dusty materials; the tubular belts plants are the most suitable to the handling of those materials where a special care to the environmental protection is needed (developed areas, parks etc.)

Some products affected by the presence of humidity, such as cement, meet in the tubular conveyor belt system the right technology for their transport in open areas such as loading and unloading wharfs.

PIPEX and PIFLEX give the maximum of their potential in the fields of:
• Cement factories
• Power plants
• Ports
• Steel factories


and any place where environmental impact must be reduced and/or where obstacles must be got round.

Design Details

This page shows the layout of the main components of a tubular conveyor belt. Pulleys and take-up devices are the typical one of a standard troughing belt while the development of the plant is totally different because the belt, instead of leaning against the idlers, wraparounds by idler sextines placed perpendicularly to the belt and supported by purpose-made panels. As per the conventional troughing conveyor belts, it is worth to design the conveyor plant in accordance with the characteristics of the belt to adopt, especially keeping into consideration the modulus of elasticity of the carcass material.

From that derives transition lengths, bending radius as well as the take-up lengths. Where possible, depending on the centre-to-centre distance and the available space for take-up, it is recommended to adopt Pipex textile belts that, because of the reduced modulus of elasticity, allow short transition lengths and reduced bending radius. On the contrary, when the centre-to-centre distance requires an unacceptable take-up run, it is better to choose the Piflex tubular belt made of a steel carcass requiring wider transition lengths and bending radius.
A wrong evaluation of transition lengths and/or bending radius may cause an incorrect closure of the belt and its premature damaging.
To obtain a perfect performance it is furthermore essential to choose the pipe diameter keeping into consideration both the requested capacity and the size of the material; overfilled pipes or too big material lump sizes may determine an obstruction of the materials among the idlers and the damaging of both the belt and the steel structure.

Technical Details
Nominal
tube
Indicative
belt width
Standard
idler
spacing
Minimum
transition
distance**
Minimum
curve
radius**
Max
lump size
Max
speed
Volumetric
Capacity*
mmmmmmmmmm/secm3/h

100

150

200

250

300

350

400

450

500

550

450

600

800

1000

1200

1400

1600

1800

1900

2100

1,10

1,10

1,30

1,45

1,60

2,00

2,20

2,30

2,40

2,50

2,5

4,0

5,0

6,5

7,5

9,5

10,0

11,0

12,5

13,5

30

45

60

75

90

105

120

135

150

165

33

45

60

75

95

110

125

140

160

180

 

2,2

2,2

2,5

2,5

3,0

3,5

4,0

4,5

5,0

5,5

 

21,2

46,9

84,7

132,4

190,7

256,2

339,1

429,2

530,0

641,2

 

* Capacity is intended at 1 m/sec with suggested 75% filling factor

**Datas valid only for Pipex textile belts; for Piflex steel carcass belts correct the datas according to the rules here below

 

Maximum curve angle for standard applications ß1 ≤ 45°

 

Minimum radius admitted
R ≥ 300 x tube diameter for Pipex textile belts
R ≥ 600 x tube diameter for Piflex steel carcass belts
For angles > 45° minimum radius must be gradually increased till the double at the maximum allowed angle of 90°. Special belt construction must be considered in order to bear the lateral compression.

 

Max inclination ß2 = 30°

 

Minimum transition length
TL ≥ 25 x tube diameter for Pipex textile belts
TL ≥ 40 to 60 x tube diameter for Piflex steel carcass belts according to the elastic modulus

 

Cover Characteristics
Nominal
tube
Indicative
belt width
Standard
idler
spacing
Minimum
transition
distance**
Minimum
curve
radius**
Max
lump size
Max
speed
Volumetric
Capacity*
mmmmmmmmmm/secm3/h

100

150

200

250

300

350

400

450

500

550

450

600

800

1000

1200

1400

1600

1800

1900

2100

1,10

1,10

1,30

1,45

1,60

2,00

2,20

2,30

2,40

2,50

2,5

4,0

5,0

6,5

7,5

9,5

10,0

11,0

12,5

13,5

30

45

60

75

90

105

120

135

150

165

33

45

60

75

95

110

125

140

160

180

 

2,2

2,2

2,5

2,5

3,0

3,5

4,0

4,5

5,0

5,5

 

21,2

46,9

84,7

132,4

190,7

256,2

339,1

429,2

530,0

641,2

 

* Capacity is intended at 1 m/sec with suggested 75% filling factor

**Datas valid only for Pipex textile belts; for Piflex steel carcass belts correct the datas according to the rules here below

 

Maximum curve angle for standard applications ß1 ≤ 45°

 

Minimum radius admitted
R ≥ 300 x tube diameter for Pipex textile belts
R ≥ 600 x tube diameter for Piflex steel carcass belts
For angles > 45° minimum radius must be gradually increased till the double at the maximum allowed angle of 90°. Special belt construction must be considered in order to bear the lateral compression.

 

Max inclination ß2 = 30°

 

Minimum transition length
TL ≥ 25 x tube diameter for Pipex textile belts
TL ≥ 40 to 60 x tube diameter for Piflex steel carcass belts according to the elastic modulus